Enerpower 12V-24V Li-Ion-Charger (42V) for Vanmoof S3 / X3 Batteries 36V 2A
€49.99*
Prod. no.:
12027
Enerpower 12V-24V Li-Ion-Charger (42V) for Batteries 36V | output 2A | power 85W | with DC Round Plug / Vanmoof S3 / X3
With this 85W, 12V-24V DC charger from Fuyuang (Enerpower) you can easily charge your ebike battery using the 12V cigarettes lighter in your car or caravan/mobile home.
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 2A / 85 Watt
Plug: Vanmoof S3 / X3
Input: 12V-28V DC 8A (Max.)
Manufacturer: Atnen
Brand: Enerpower
CC/CV with End-of-Charge voltage of 42V + 0.2V
Charges Li-ion batteries of 36V (10S)
Energy: 85W
Dimensions without cables: 15 x 6 x 4 cm
Weight: about 465 Gramm
Safety
Over-current protection: <2.3A
Short-circuit protection: 3.5W
Reversed-polarity protection
9.53
%
Enerpower Charger 42V 2A for VANMOOF S3 and X3
€37.99*
€41.99*
Prod. no.:
11302
Enerpower fast charger CCCV 125W (42V / 2A charging current) for 36V eBike batteries from VANMOOF S3 und X3
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
85W output power (up to 2A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.2A (Max.)
Output
42V DC 2A
Connector: VANMOOF DC
Safety Measures
Over current protection: < 2.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with following batteries (XLR-4):Derby Cycle Impulse 14574-1GP 11 Ah Derby Cycle Impulse 19396-1GP 11 Ah Derby Cycle Impulse 30695-01 11 Ah Derby Cycle Impulse 16565-1GP 15 Ah Compatible with following types of VANMOOF::S3X3
Variants from €35.59*
16.37
%
Enerpower Charger 42V 3A for VANMOOF S3 and X3
€45.99*
€54.99*
Prod. no.:
114411
Enerpower fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from VANMOOF S3 und X3
In this charger, the charging voltage was reduced from 42V to 41.3V (4.13V per battery cell) to give 36V 10S batteries a longer service life. Please make sure that around 10% of the nominal capacity is not available
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: VANMOOF DC
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with following batteries (XLR-4):Derby Cycle Impulse 14574-1GP 11 Ah Derby Cycle Impulse 19396-1GP 11 Ah Derby Cycle Impulse 30695-01 11 Ah Derby Cycle Impulse 16565-1GP 15 Ah Compatible with following types of VANMOOF::S3X3
Variants from €43.99*
20
%
Enerpower Charger 42V 3A for VANMOOF S3 and X3
€43.99*
€54.99*
Prod. no.:
11292
Enerpower fast charger CCCV 125W (42V / 3A charging current) for 36V eBike batteries from VANMOOF S3 und X3
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
125W output power (up to 3A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2A (Max.)
Output
42V DC 3A
Connector: VANMOOF DC
Safety Measures
Over current protection: < 3.3A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with following batteries (XLR-4):Derby Cycle Impulse 14574-1GP 11 Ah Derby Cycle Impulse 19396-1GP 11 Ah Derby Cycle Impulse 30695-01 11 Ah Derby Cycle Impulse 16565-1GP 15 Ah Compatible with following types of VANMOOF::S3X3
Variants from €40.99*
Enerpower Charger 42V 4A for VANMOOF S3 and X3
From
€45.23*
Prod. no.:
11293
Enerpower fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries from VANMOOF S3 and X3
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 4A
Connector: VANMOOF DC
Safety Measures
Over current protection: < 4.4A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with following types of VANMOOF:: VANMOOF S3 and X3
10
%
Enerpower Charger 42V 4A for VANMOOF S3 and X3 GaN
€53.99*
€59.99*
Prod. no.:
12097
Enerpower fast charger CCCV 170W (42V / 4A charging current) for 36V eBike batteries from VANMOOF S3 and X3
Gallium Nitride (GaN) is a semiconductor material that
is increasingly gaining importance in electronics. It has excellent
electrical properties, making it ideal for use in high-frequency and
high-power applications.Compared to silicon, GaN offers higher efficiency, faster switching speeds, more compact designs, and lighter weight.
Highligths
Overcurrent, short circuit and reverse polarity protection
Safety standards: UL1310, EN60335
GS (tested safety) and UL approved
Protection class: IP20
CCCV - Constant current & Constant voltage - the right way to charge Li-ion batteries
170W output power (up to 4A + 10% output current)
Simple and safe handling (plug-and-play)
High quality and long life
LED indicator (red / green)
Technical Details
Input
Voltage: AC 100-264V
Input Current: 2.5A (Max.)
Output
42V DC 4A
Connector: VANMOOF DC
Safety Measures
Over current protection: < 4.4A
Short circuit protection: constant
Reverse polarity protection
Conformity
IEC 61558-1:2005
IEC 61558-:2005/AMD1:2009
IEC 61558-2-16:2009
IEC 61558-2-16:2009/AMD1:2013
Compatible with following types of VANMOOF:: VANMOOF S3 and X3
Fuyuang 12V-24V Li-Ion-Charger (42V) for Vanmoof S3 / X3 Batteries 36V 3A
€55.99*
Prod. no.:
12028
Fuyuang 12V-24V Li-Ion-Charger (42V) for Batteries 36V | output 3A | power 125W | with DC Round Plug / Vanmoof S3 / X3
With this 82W, 12V-24V DC charger from Fuyuang (Enerpower) you can easily charge your ebike battery using the 12V cigarettes lighter in your car or caravan/mobile home.
Highlights / Technical Details
Cable length: ca. 100 cm
Output: 3A / 125 Watt
Plug: Vanmoof S3 / X3
Input: 12V-24V DC 12A (Max.)
Manufacturer: Fuyuang
Brand: Enerpower
CC/CV with End-of-Charge voltage of 42V + 0.2V
Charges Li-ion batteries of 36V (10S)
Energy: 125W
Safety
Over-current protection: <3.3A
Short-circuit protection: 3.5W
Reversed-polarity protection